Washing machine does not go: the causes of the most common problems

Today we want to talk to you about the remedies of when the washing machine does not work.

The washing machine is an appliance that cannot be missing in any home, especially if a large family lives in it.

Prolonged and intense use, and even poor maintenance, can cause damage to some internal components in the long run, generating operating problems with causes that are difficult to identify.

There are some more frequent than others, which very often have trivial reasons, sometimes resolvable even independently without the help of the plumber.

Washing machine does not go: it does not wash well

It is probably the most common problem among all those that can be encountered during washing. The causes of this nuisance are often very trivial.

For example, before calling a technician you need to make sure you dose the detergent accurately. It may seem obvious, but sometimes saving too much on the quantities can generate really unsatisfactory washing results.

Halos on the fabrics can also be caused by the hardness of the water or by lime scale in some parts of the washing machine. In this case it is necessary to remember to always use the descaler , possibly of good quality.

Finally, another reason for inefficient washing can be the dirt accumulated inside a fundamental part of the washing machine: the filter .

This component must be periodically cleaned through one or more vacuum washes, even when it has a self-cleaning structure.

When the washing machine does not spin

One of the essential functions of any washing machine is the centrifuge. It allows you to treat all garments evenly, rubbing them properly to completely eliminate all traces of dirt.

However, some problems can completely block this functionality. Usually the causes are technical-structural, but they do not always require expert intervention. For example, the centrifuge may not work simply because of a break in the door switch .

The latter is still open, therefore the centrifuge stops to prevent water from leaking. The solution is to change the single piece. If, on the other hand, water remains in the basket, the cause is most likely to be found in the drain.

Finally, if metallic noises are heard during the spin cycle , the problem is certainly attributable to the belt.

When the washing machine does not drain the water

Stagnation of water is one of the most serious problems that can be encountered. In fact, it is usually determined by the compromise of a structural component of the appliance.

The causes can be mainly four.

1.       The drain pump is broken or blocked

2.       The connection of the drain hose is blocked

3.       The drain pipe is blocked

4.       The electronic command and impulse card is damaged

In all the cases listed above it is better to avoid the do-it-yourself and contact a specialized plumber , who will know how to make a washing machine repair estimate as accurate as possible, also allowing you to evaluate, if necessary, the purchase of a totally new washing machine.

If this our guide on the washing machine is wrong, it was useful to you then share it with relatives and friends using the Social buttons that you find below. It costs you nothing but for us it would be a source of great pride.

Read Also: 5 Things That Could Go Wrong with your Air Conditioner